Friday, August 12, 2011

Jailbreak PS3 3.70 Firmware

How to Jailbreak 3.70 Firmware:
1. Download the file from the link below.
2. Click on Download and wait for the download to complete.
3. On completion, you will get a PS3UPDAT.PUP file.
4. Plug a USB stick into your computer and Create a folder in the root of the USB stick called PS3.
5. Create a folder inside the PS3 folder called UPDATE.
6. Move PS3UPDAT.PUP to the directory UPDATE which you just created on the USB stick.
7. Plug-in the USB stick into your PS3 and Navigate to Settings Tab System Update.
8. Choose Update via Storage Media.
9. It will say it found Version 3.70.
10. Choose OK.
11. Accept Conditions and Install Update.
12. After less than a minute, your PS3 will update, beep 4 times then shut down.
13. Power up your PS3 (You will have to do it on the console and not by the controller.
14. Your PS3 is now jailbroken on 3.70 Firmware. Enjoy.

Download Link:

Tuesday, August 9, 2011

Downgrade PS3 3.66 to 3.55 Jailbreak

Download link   :

STEP 1 click on the link above
STEP 2 complete one of the available surveys….
STEP 3 wait one minute then download will unlock!!!!
1. copy the 3 files to your usb flash drive..
2. insert the flash drive in your ps3 system….
3. on your ps3..go to system update..then select update via storage media!!!
after your ps3 is updated to system firmware 3.55 Jb… go to games tab and install package files you ps3 can now play backup and downloaded ps3 games from pc!!!!
you can download free full ps3 games here

Tuesday, August 2, 2011

Jailbreak 4.3.5 iPhone 4/3GS iPod Touch 4G/3G & iPad - Redsn0w 0.9.8b4

This post will teach you how to Jailbreak 4.3.5. Jailbreaking allows you to take full control of your iPhone, iPad or iPod Touch and it’s very easy to do and best of all it isn’t harmful to your device!
Steps (for Mac and PC users):

1. Download Redsn0w, iOS 4.3.5 and iOS 4.3.4 for your iDevice in the download section below
  • If you’re on Windows Vista or Windows 7 then you need to right click Redsn0w and set compatibility to windows XP (service pack 2) and then run it as an administrator
2. Plug in iDevice and run Redsn0w
3. Browse for your 4.3.4 firmware in Redsn0w and select it (NOT YOUR 4.3.5 FIRMWARE)
4. Hit next and then check install Cydia
5. Enter DFU mode ahead of time to bypass the instruction screen!
a. Hold down the power button for 3 seconds
b. Continue holding the power button and start holding the home button and continue HOLDING BOTH for 10 seconds
c. Let go of power and continue holding home button for 20 seconds (even after it skips to the next screen! YOU MUST COUNT TO 20 ON YOUR OWN)
6. Wait for it to finish and reboot (the video shows how long EVERYTHING takes)
7. Power off your iDevice while its plugged in and then open Redsn0w again
8. Browse for your 4.3.4 firmware again
9. Check off Just boot tethered right now and follow ALL the instructions in step 5
You are now Jailbroken on iOS 4.3.5
NOTE: you will need to run Redsn0w again in the “Just boot tethered right now” mode every time you need to reboot your iDevice and use ANYTHING from Cydia (including Cydia itself) – the same applies for Safari!
If you get a white Cydia icon and or your Safari doesn’t work then simply reboot in Redsn0w’s “Just boot tethered right now” mode!


Monday, June 27, 2011

How to Jailbreak PS3 3.61 or 3.66 Firmware [RELEASED]

1. Download the Files
2. Next step is to Extract Files into a non-used and/or booted clean USB stick or new in other words
3. Insert the USB into your PS3, Install the update from the stick as you would when updating your system
4. Once its updated, you can now insert any game and backup as many games into you PS3 Hard drive then you can launch them anytime.

Now that you learned how to jailbreak ps3 it is time for you to have fun!

Saturday, May 28, 2011

How to Downgrade Firmware 3.61 to 3.60 PS3

1. Get the .rar file Downgrade 3.61 - 3.60 by TheKeygenManiac.rar
2. Extract it
3. Unpack and Copy the application inside the .rar file to Pendrive
4. Swap to PS3
5. Restart PS3
6. Wait for a few minutes

Monday, May 23, 2011

Jailbreak iOS 4.3.2 & 4.3.3 Untethered iPhone,iPad,iPad 2 ,iPod Touch using Redsnow

New Sn0wbreeze-v2.7.3 (update 12 May 2011)

Sn0wbreeze 2.7.3:

iOS 4.3.3 & 4.3.2 for iPhone, iPad, iPad2 or iPod touch: 

New Greenpoison RC7

New Greenpoison RC7  ( Update ) 



Type Jailbreak
With Greenpois0n users can perform a jailbreak on your device type untethered. This means you will not need to reconnect the device each time you restart the computer to avoid losing your personal data and, consequently, also the jailbreak itself.

Type Jailbreak
1. First download Greenpois0n:

2. Once the download is complete, move the archive . zip and unzip it on your desk.
3. Inside the folder find the file . exe of Greenpois0n, open file
4. Open the program, click on the 'Prepare to Jailbreak (DFU)'.

5. Greenpois0n will be shown in the instructions to put the device in DFU Mode (Press the Power button for two seconds, press Home + Power for 10 seconds, release the Power button and keep pressing Home).

6. If you have performed these steps correctly, your device will now be entered into DFU mode and then ready for the jailbreak.
7. From here on, the whole process will be automatic. The success of the operation will be confirmed directly by Greenpois0n.
For those of you who don’t know, GreenPois0n is based on a low-level bootrom exploit which Apple won't be able to patch with a new iOS firmware; instead, they will have to introduce a new hardware for the current devices to close the lopphole. That means all existing 4th-generation devices now can be jailbroken forever thanks to GreenPois0n! We will be back with quick how-to guides soon, stay tuned for that !!

This release of greenpois0n supports:
- iPhone 4
- iPhone 3G S
- iPod touch (4th Generation)
- iPod touch (3rd Generation)
- iPad
Soon there will be another release, adding things like support for:
- Apple TV (2nd Generation)
- iPod touch (2nd Generation)
With Greenpois0n users can perform a jailbreak on your device type untethered. This means you will not need to reconnect the device each time you restart the computer to avoid losing your personal data and, consequently, also the jailbreak itself.