Jailbreak PS3 3.70 Firmware

How to Jailbreak 3.70 Firmware:

1. Download the file from the link below.
2. Click on Download and wait for the download to complete.
3. On completion, you will get a PS3UPDAT.PUP file.
4. Plug a USB stick into your computer and Create a folder in the root of the USB stick called PS3.
5. Create a folder inside the PS3 folder called UPDATE.
6. Move PS3UPDAT.PUP to the directory UPDATE which you just created on the USB stick.
7. Plug-in the USB stick into your PS3 and Navigate to Settings Tab System Update.
8. Choose Update via Storage Media.
9. It will say it found Version 3.70.
10. Choose OK.
11. Accept Conditions and Install Update.
12. After less than a minute, your PS3 will update, beep 4 times then shut down.
13. Power up your PS3 (You will have to do it on the console and not by the controller.
14. Your PS3 is now jailbroken on 3.70 Firmware. Enjoy.

Download Link:

Downgrade PS3 3.66 to 3.55 Jailbreak

DOWNLOAD INSTRUCTIONS

Download link   :

STEP 1 click on the link above

STEP 2 complete one of the available surveys….

STEP 3 wait one minute then download will unlock!!!!

  

INSTALL INSTRUCTIONS

1. copy the 3 files to your usb flash drive..

2. insert the flash drive in your ps3 system….

3. on your ps3..go to system update..then select update via storage media!!!

after your ps3 is updated to system firmware 3.55 Jb… go to games tab and install package files you ps3 can now play backup and downloaded ps3 games from pc!!!!

you can download free full ps3 games here  http://www.ps3iso.com/

Jailbreak 4.3.5 iPhone 4/3GS iPod Touch 4G/3G & iPad - Redsn0w 0.9.8b4

This post will teach you how to Jailbreak 4.3.5. Jailbreaking allows you to take full control of your iPhone, iPad or iPod Touch and it’s very easy to do and best of all it isn’t harmful to your device!

Steps (for Mac and PC users):

1. Download Redsn0w, iOS 4.3.5 and iOS 4.3.4 for your iDevice in the download section below

• If you’re on Windows Vista or Windows 7 then you need to right click Redsn0w and set compatibility to windows XP (service pack 2) and then run it as an administrator

2. Plug in iDevice and run Redsn0w

3. Browse for your 4.3.4 firmware in Redsn0w and select it (NOT YOUR 4.3.5 FIRMWARE)

4. Hit next and then check install Cydia

5. Enter DFU mode ahead of time to bypass the instruction screen!

a. Hold down the power button for 3 seconds
b. Continue holding the power button and start holding the home button and continue HOLDING BOTH for 10 seconds
c. Let go of power and continue holding home button for 20 seconds (even after it skips to the next screen! YOU MUST COUNT TO 20 ON YOUR OWN)

6. Wait for it to finish and reboot (the video shows how long EVERYTHING takes)

7. Power off your iDevice while its plugged in and then open Redsn0w again

8. Browse for your 4.3.4 firmware again

9. Check off Just boot tethered right now and follow ALL the instructions in step 5

You are now Jailbroken on iOS 4.3.5

NOTE: you will need to run Redsn0w again in the “Just boot tethered right now” mode every time you need to reboot your iDevice and use ANYTHING from Cydia (including Cydia itself) – the same applies for Safari!

If you get a white Cydia icon and or your Safari doesn’t work then simply reboot in Redsn0w’s “Just boot tethered right now” mode!

 FIRMWARE DOWNLOAD:

4.3.4 Firmware (select the firmware that corresponds to your device)
4.3.5 Firmware (select the firmware that corresponds to your device)
REDSN0W DOWNLOAD:
Windows – Redsn0w 0.9.8b4
Mac – Redsn0w 0.9.8b4